PR68 internal tube cutter for thick walled tube found in boilers and steam drums

I.D. range from 0.394" up to 4.134" larger sizes on request.

Cutting reach: standard at 4.0" up to 16". Longer reaches available on request.

PR68 iNTERNAL TUBE CUTTER

features:

PR-68 tube cutters are ideal for tube cutting thick walled boiler tube of 2” O.D. and higher.

The Internal Tube Cutters PR-68 is driven via the square in a clockwise direction using either an electric, pneumatic or hydraulic driving machine.

PR-68 type tube cutters are available in standard reach of 4” (101.6mm). Additional reaches in increments of 4” are available up to 16” (406.4mm)

Contact us if you require larger sizes and longer reach.

Consult the PDF Specifications below to cross refer all data to the  OD, wall thickness and  sheet thickness.




 

boiler expansion accessories

tools used in the rolling of boiler tubes

Vacuum Tube Leak Detector Kit Please consult the pdf below for all the Boiler Expansion Accessories available

Consult the PDF Specifications below to cross refer all data to the tube OD, wall thickness and tube sheet thickness. Also, part numbers for spare mandrels and rollers can be found here. If the PDF is two pages then the data has to be read across the two pages.